Bluetooth Amplifier - AIYIMA A05

Audio Amplifiers
$109.99 $79.99

Amplifier Chip: TPA3116*2
Bluetooth 5.0 Chip: QC3003
Operation Amp chip : NE5532*4
Maxpower output: 100W*2 2Ω load
THD: OUTPUT=1W 0.01%
Speakermatching impedance: 4-8Ω
SNR: ≥98dB
Working voltage: DC19-24V
Dimension: 118.5 * 117.5 * 36mm
Input Sensitivity: 0.775V
Bare Weight: 0.4Kg
Frequency Range: 20Hz-20kHz(±3dB)
PackageDimension: 257 * 215 * 65mm

How To Use
1. Make sure the VOL buttonto the minimum.
2. Connect the left and right speakers according to the interface instruction of the rear surface, and pay attention to distinguish positive and negative.
3. Connect the sound source that needs to be used(Use bluetooth transmission to refer to the next step)
4.Switch to bluetooth for bluetooth input when using bluetooth input, the blue light of bluetooth indicator flickers, and the blue light remains on after the phone is connected successfully
5.Connect to power.
6. Press the power switch.
7. Turn the VOL button clockwise to select the desired volume.
8.The version with volume adjustment can choose reasonable EQ through rotating potentiometer.

1. Please do not open the shell without permission. Improper operation may cause the danger of electric shock
2. Please use the power supply of the regular manufacturer, otherwise it will damage the machine.
3. Please do not use the machine in a high temperature and humidity environment.

Question & Answer
Q1: All cables are connected, but no sound output?
A: 1. Check if the POWER indicator is on, and turn on the POWER if it is not on.When the indicator light is still not on after turn on the power, you can find a laptop power and connect to test whether it is the machine fault or a power failure.
2. If the indicator light is on, check whether the VOL knob is in the minimum position. If so,turn clockwise to normal Volume
3. If both of the above are normal, check the input device if it is paused, mute, or the volume is minimized.

Q2: Why does the sound is cracking?
A: when theoutput powerexceeds the normal power of amplifier, there will be a large distortion. you can turn down the front volume or the power amplifier volume, then it is ok.

Q3: Why do loudspeakers make a lot of electric noise?
A: if you are not using the original factory standard power supply, please replace the power supply before testing.Many power supply in the market have large interference coefficient, which will cause a lot of current sound.

Q4: Why connect signal line, not play music have interferential sound
A: If you use unshielded signal lines, there will be interference signals entering the power amplifier. If you hate the sound, you are advised to use the shielded signal lines or unplug the signal lines.

Q5: Why does the amplifier stop working after a period of time?After a period of time off, it was working again.
A: Normally in this case, the amplifier is overheat protected, and the output power may have exceeded the designed power, so you can lower the volume a little and try again.

Q6: why does the volume of the machine stay the same, while the sound of different audio sources (such as CDS and mobile phones) is different?
A: The output range of different types of audio source devices is different, the mobile phone is usually 0.35mV, and the CD is 1V.The signaloutput amplitude of the sound source will directly influence the volume.

Q7: Whythe sound of the power amplifier is not very good at the beginning, the high frequency is not clear, but after working for 8 hours the sound is normal?
A: Speaker and amplifier is a very sensitive equipment, also need to know each other, and the matching process, usually thesound will be good after the new power amplifier and the speaker work more than ten hours

Package Content
Amplifier * 1 (Suit the 24V supply power)
Bluetooth antenna * 1
Audio Cable * 1
User's manual * 1 
( Not Including supply power !!!)

All items in store may take 2 to 5 business days to process.  Please add processing time to your shipping estimate below.

Here is an estimate of the shipping times.  Due to factors that often affect international shipments, such as holidays, customs, and weather delays, we can only offer an estimate of shipping times. 


Estimated Shipping Time

United States

10-30 business days

Canada, Europe

15-40 business days

Australia, New Zealand

15-45 business days

Mexico, Central America, South America

20-60 business days 

Middle East (UAE, Saudi Arabia)

20-40 business days


IMPORTANT: We are not responsible if a package is undeliverable because of missing, incomplete, or incorrect destination information. Please enter the correct shipping details when checking out. If you realize you have made an error, simply e-mail us at aiyimatech@gmail.com as soon as possible. However there is a 72-hour wait list for email, therefore, if your order has left our warehouse within 72 hours, it is out of our control.
Aiyima is not responsible for destination country tax and/or any duty charge that may incur. Customers will be held accountable for any restrictions, duties, taxes, and any other fees collected from the destination country.
Aiyima will not be responsible for any Duties, Taxes, or Customs fees under any circumstances.
If the order arrives in your country and...
• The customer refuses to accept the package
• The number of attempts is made in the country of destination to deliver the package.
Aiyima reserves the right to abandon the package(s) and will not be responsible for any refund.

Have Questions?Ask An Expert
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Bluetooth Amplifier - AIYIMA A05
You have successfully subscribed!