AIYIMA A07 MAX - US Warehouse Ship

AIYIMA
Audio Amplifiers
$129.99 $102.99
$102.99
Model : AIYIMA A07 MAX
 
Product name:A07 MAX TPA3255 Power Amplifier
 
Stereo Max Output Power(switch stereo mode):300Wx2 / 4Ω(48V/12A)
 
Mono Max Output Power(switch mono mode):600W/ 2Ω(48V/12A)
(R+ connect to speaker +, L+ connect to speaker -)
 
Working Voltage:DC24-48V,5A or more
 
Replaceable Op-Amp Chips:OPA2604AP, OPA2134, MUSEO1/02/03, LME49720NA, LM4562, AD827AQ, etc
 
AUX OUT: active nsubwoofer or power amplifier
 
3.5mm AUX OUT as output connect to next amplifier without volume control
 
THD:0.007%
 
SNR:≥110dB
 
Input sensitivity:1V
 
AUX Maximum Output level:1V
 
Frequency response 20Hz-20KHz(±1dB)
 
 
 
Package included:
 
1Pcs A07 MAX
 
1Pcs Power Adapter(Optional)
 
 
 
Q: All my cables are connected, but there is no sound output?
 
A: 1. Check if the machine has started and if the indicator light is on.
2. Is the selection of mono/stereo mode and the connection of the speaker interface correct.
3. If the above two points are normal, check whether the playback device of the input sound
source is paused, muted, or the volume is at the minimum.
 
 
Q: Why is the sound distorted?
 
A: The input level may be too large. If the volume of the sound source equipment is adjusted
to the maximum, and the volume of the machine is also adjusted to the maximum, it is
easy to be distorted. At this time, turn down the volume of the sound source input device
or machine.
 
 
Q: Why does the volume of the machine remain the same, but the sound level
is different when connecting to different audio sources (for example,
connect a CD first, then a mobile phone)?
 
A: The amplitude of electrical signals output by different playback devices is different. For
example, mobile phones are usually 0.35V, while CDs are 1V. The natural sound size is
different.
 
 
 
Q: Why does the horn emit a loud electrical current sound or buzzing sound?
 
A: 1. If you are not using the original standard power supply, please replace the power supply
and test again.Many power supplies in the market have interference, which will cause
current sound.
2. When the signal line without shielding is used, there will be interference signals entering
the power amplifier for amplification. It is recommended that you replace the signal line
with shielding.
3. There is still noise after troubleshooting the above two points,Please confirm the noise
is from the external or the internal. Disconnect all inputs, only retain the power supply
and output cable, if the noise disappears, that means the noise is from the audio input.
If the noise is still there, the noise may be caused by interference with the power supply
or generated inside the amplifier
 
 
Q: Why there is no sound or very little sound after the amplifier is connected
to the speaker?
 
A: 1. Please check the audio source has been turned on and the volume is not at the minimum.
2. Please confirm whether the speaker and amplifier match ( For example, the speaker is
fixed resistance or fixed voltage, the power of speaker is too much over the power of the
amplifier etc).
 
 
Q: What are the reasons for the unbalanced left and right volume of the s
peakers and how to eliminate them?
 
A: Please check audio source, input cable, volume potentiometer (some amplifiers have
balanced control or separate volume control of left and right channel ), speaker cable,
speakers (whether the position and the distance is symmetrical) and other factors.
 
 
Q: Why is there a thumping sound when swithing on/off?
 
A: Please confirm the on-off sequence is correct, normally it follows the order of signal
transmission when turn on: audio source → preamp / DAC → amplifier → speaker. (The
sequence is reversed when switching off. As the internal capacitors will be discharged for a
while after shutdown. If turn off the preamp firstly and then turn off amplifier, impact
sound will be easily caused which may damage the amplifier or speaker in severe cases).
AIYIMA A07 MAX Spec
SNR&THDFrequency Response & FFTA07 MAX Powerstereo mode & mono modeshell heat dissipation designMono & Stereo Adjust SwitchTPA3255 ChipAIYIMA A07 MAX

Customer Reviews

Based on 3 reviews Write a review

All items in store may take 2 to 5 business days to process.  Please add processing time to your shipping estimate below.

Here is an estimate of the shipping times.  Due to factors that often affect international shipments, such as holidays, customs, and weather delays, we can only offer an estimate of shipping times. 

 Location

Estimated Shipping Time

United States

10-30 business days

Canada, Europe

15-40 business days

Australia, New Zealand

15-45 business days

Mexico, Central America, South America

20-60 business days 

Middle East (UAE, Saudi Arabia)

20-40 business days

 

SHIPPING POLICY
IMPORTANT: We are not responsible if a package is undeliverable because of missing, incomplete, or incorrect destination information. Please enter the correct shipping details when checking out. If you realize you have made an error, simply e-mail us at aiyimatech@gmail.com as soon as possible. However there is a 72-hour wait list for email, therefore, if your order has left our warehouse within 72 hours, it is out of our control.
Aiyima is not responsible for destination country tax and/or any duty charge that may incur. Customers will be held accountable for any restrictions, duties, taxes, and any other fees collected from the destination country.
Aiyima will not be responsible for any Duties, Taxes, or Customs fees under any circumstances.
If the order arrives in your country and...
• The customer refuses to accept the package
• The number of attempts is made in the country of destination to deliver the package.
Aiyima reserves the right to abandon the package(s) and will not be responsible for any refund.

Have Questions?Ask An Expert
AIYIMA A07 MAX - US Warehouse Ship
You have successfully subscribed!