Bluetooth Amplifier - AIYIMA A03Add to Wish List
Product introduction: 1. With two input, all the way aux input convenient link traditional wired analog signal input; another Bluetooth wireless input, you can and mobile phones, computers and other Bluetooth equipment easy links, free from wire bondage, easy to...
Subwoofer Amplifier - AIYIMA A3001Add to Wish List
Parameters: Maximum output power: 300W*1 4Ω load Power amplifier chip: TPA3255D2 Tone chip: NE5532 DC chip: 2596 Full frequency frequency response: 20Hz-20kHz (±3dB) Speaker matching impedance: 4-8Ω Distortion: 0.03% when outputting 1W Working voltage: DC24-35V Signal to noise ratio: ≥106dB...
Amplifier Board - AIYIMA B2D1956 - TDA7498EAdd to Wish List
Description:1.Support two input, one AUX input, connect wired analog signal input; another one Bluetooth wireless input, can connect with mobile phone, computer and other Bluetooth devices.2.Support the frequency adjustment of the subwoofer, you can adjust the bass frequency according to...
Subwoofer Amplifier - AIYIMA A04Add to Wish List
Features: 1. Using TI's ultra-high definition digital power amplifier IC (TPA3251), the output power is up to 175W*2 2.Fever grade water filter with two 3000uf filters up to 6000uf; use red ring inductor, high frequency characteristics, LC filter network with S-iemens...
Tube Amplifier Preamp - AIYIMA T6Add to Wish List
Product parameters: Power supply: DC12V 2A ( Without Power Adapter) Audio input: connected to MP3, computer CD, DVD, mobile phone, etc. Signal output Audio output: connected to amplifier, active speaker and other signal input With treble and bass adjustment Specifications: Bluetooth...
Subwoofer Amplifier - AIYIMA S01Add to Wish List
Description: The subwoofer only transmits the bass, the frequency is below 80Hz, the middle and high frequencies are attenuated, the basics are only the bass, and the middle and high notes are very slight. The digital amplifier can be used...
Subwoofer Amplifier - AIYIMA B2D1728Add to Wish List
Product description: 1. Using original TPA3116*2, NE5532 2. The power supply filter capacitor uses 10 470UF/25V electrolytic capacitors to ensure strong and continuous power support. 3. Coupling capacitors use German Weimar enthusiast capacitors, vocals are more attractive 4. The resistor uses...
Tube Amplifier Preamp - AIYIMA 6N3Add to Wish List
Product description: This product is a preamplifier, non-amplifier function, need to be connected to amplifier or active speakers, it can not be directly connected to passive speakers, speakers and headphones. It can't be used in the car, it will burn...
Amplifiers Board - AIYIMA A2D247 - TPA3116Add to Wish List
Product description: 1. This is a bass power amplifier board with preamplifier, bass crossover, and bass volume potentiometer control. It is for the pros who already have 2.0 amplifiers, and the DIY combination is used for 2.1 amplifiers. 2. It...
Bluetooth Amplifier - AIYIMA A01Add to Wish List
Product description: Parameters: Product name: TPA3116Mini power amplifier Amplifier chip:TPA3116 Max output power: 50W*2 Color: Black / Silver (Optional) Power supply: DC15-24V (outer diameter 5.5mm/ inner diameter 2.5mm) Current: more than 3A Impedance: 4-8 Ohm Dimensions: 87*32*102MM Features: Equipped...
Subwoofer Amplifier - AIYIMA A1001Add to Wish List
Chips: TPA3116D2+NE5532 Max Power: 100W*1 Full frequency response : 20Hz-20kHz(±3dB) The speaker matches the impedance：2-8Ω Number of Channel: Mono Working Voltage: DC12-24V (With a power adapter) THD: Output 1W@ 0.03% SNR: ≥106dB Input sensitivity: 0.2mV Dimension: 118.5*98*33MM(without protruding knob section)...